Dynamic Analysis of a Debonding Piezoelectric Sensor Layer of a Smart Beam

  • H. A. Isede Department of Mathematics, University of Lagos, Nigeria.
  • T. J. Taiwo Department of Mathematics, University of Benin, Benin City, Nigeria.
Keywords: Debonding, Piezoelectric Actuator/Sensor, Finite Element Analysis, Axial displacement, Transverse displacement

Abstract

In this paper, a specific study of the dynamic analysis of a debonding piezoelectric sensor/actuator layer attached to a host beam in a smart structure using finite element method was carried out. The results were obtained by using the Euler-Bernoulli beam theory to derive the governing equations converted to systems of matrix equations by the Galerkin finite element method, and solved numerically by Maple 18 package. It was observed that increases in the bending stiffness and the density of the composite beam decreases the displacement of the transverse displacement of the piezoelectric sensor/actuator layer, while increases in the axial stiffness and density of the composite beam increases the flexural (axial) displacement of the piezoelectric sensor/actuator layer and thereby impacting the debonding length of the attached piezoelectric patch, with respect to time.

References

Kerboua, M., Megnounif, A., Benguediab, M., Benrahou, K.H., Kaoulala, M.F. Vibration Control Beam Using Piezoelectric-Based Smart Materials. Composite Structures, vol. 123, issue 5, pp. 430-442 (2015), DOI: 10.1016/j.compstruct.2014.12.044

Gandhi, P.K., Mevada, J.R. A Finite Element Model and Active Vibration Control of Composite Beams With Distributed Piezoelectric Using Third Order Theory. IJERA, vol. 3, issue 3, pp. 940-945, (2013).

Sohrabi,M.A., Muliana, A. H. Nonlinear and Time Dependent behaviours of Piezoelectric Materials and Structures. International. Journal of Mechanical Sciences. Elsevier, vol. 166, pp. 26-45, (2015).

Lezgy-Nazargah M., Vidal P., Polit O. An Efficient Finite Element Model for Static and Dynamic Analyses of Functionally Graded Piezoelectric Beams. Composite Structures, vol. 104, pp. 71-84, (2013).

Seely, C. E., Chattopadhyay A. ExperimentalInvestigation of Composite Beams with Piezoelectric Actuation and Debonding Smart Material. International Journal of Solids and Structures, vol. 7, pp. 502-511, (1998).

Shijie, Z. Finite Element Analysis of Smart Structures with Piezoelectric Sensors/Actuators Including Debonding. Chinese Journal of Aeronautics, vol 17, pp. 246-250, (2004).

Neto, M. A., Yu, W., Roy, S. Two Finite Elements for General Composite Beams with Piezoelectric Actuators and Sensors. Finite Elements in Analysis and Design, vol. 45, pp. 295-304, (2009).

Sun D.C., Tong L., Atluri S.N. Effects of Piezoelectric Sensor/Actuator Debonding on Vibration Control of Smart Beams. . J. Solids Struct. vol. 38, issue 18, pp. 9033-9051, (2001).

Alaimo, A., Milazzo, A., Orlando, C., Messineo, A. Numerical Analysis of Piezoelectric Active Repair in the Presence of Frictional Contact Conditions. Sensors , vol. 13, issue 4, pp. 4390-4403, (2013). https://doi.org/10.3390/s130404390.

Reddy, J.N. An Introduction to the Finite Element Method (3ed). McGraw-Hill International Edition, New York. (2006).

Chopra, A.K. Dynamics of Structures: Theory and Applications to Earthquake Engineering (5ed). Pearson Education Limited, Harlow UK. (2020).

Published
2020-09-01
How to Cite
Isede, H. A., & Taiwo, T. J. (2020). Dynamic Analysis of a Debonding Piezoelectric Sensor Layer of a Smart Beam. International Journal of Mathematical Sciences and Optimization: Theory and Applications, 2020(1), 764 - 779. Retrieved from http://ijmso.unilag.edu.ng/article/view/1041
Section
Articles